Quality Hardwood Furniture Buyers Guide, Part II

Today's post is Part II of our Hardwood Furniture Buyers Guide.

Hardwood Furniture Finishes


Hardwood furniture finishes: oil, wax, lacquer or poly? Which fine hardwood furniture finish is right for you: oil, wax, lacquer or poly (hint: got kids? Go for the lacquer or poly)? This cherry wood dining table is finished with a blend of hand rubbed linseed oil and Poly gel.
Waxes and oils, such as beeswax or mineral oil are often used as hardwood furniture finishes because they sink into the fibers and condition the wood. These finishes bring out the grain of the wood and create a soft, supple surface but they need to be reapplied periodically. Alternatively, lacquer, shellac, varnish, poly and other non-porous coatings may be applied just once, creating a water proof coating that is almost maintenance free.
Which is best for you? Well if you have young children you many not have time to be oiling furniture, so lacquer may be your best bet. On the other hand, if you adore the feel of a well-oiled natural wood surface and you don't mind taking the time to re-oil periodically, go for the oil and wax.

Care of Fine Hardwood Furniture Finishes


Fine hardwood furniture is an investment that should increase in value over time, however that depends on how well you care for it (particularly for furniture with an oil or wax finish). If you follow the furniture maker's instructions your wood furniture should last a lifetime and more!
Oil Finish on Quality Hardwood Furniture This Cherry Moon Nightstand is made with cherry hardwood and finished with natural linseed oil. To keep the wood soft and supple, it is smart to re-oil it 1/month during the first year.

Protect Against Water and Humidity


Wood is very sensitive to changes in relative humidity. As the weather changes, so does the relative humidity in your home and in the moisture content of the wood in your furniture. Fine hardwood furniture that's coated with lacquer or poly is sealed and protected from the occasional water spill.

Replenish Oil and Wax Finishes Periodically


Oil and wax finishes must be replenished frequently during the first year. A rule of thumb is: clean and oil your wood furniture immediately upon delivery into you home. After that oil it once/week for the first month. Then oil 1/month for the first year. After that oil your furniture 1/year. This will result in a soft supple patina that will not only protect your furniture but add to it's beauty and value over time.

Construction Details in Fine Hardwood Furniture


Joinery


Mortise and tenon joinery illustration Mortise and tenon joinery is often used to attach side pieces to corner pieces and legs.

Joinery speaks clearly about the craftsmanship of a piece. Be sure to inspect corners and drawers to see how they're crafted and look for these robust and durable joints:
Mortise-and-Tenon Joint

Mortise-and-tenon joint are often used in armoires, dressers, chests, cabinets, tables, chairs, desks and bookcases. The tenon (projecting piece) on a board is inserted into the mortise (cavity) on another board, then glued. An M-T joint may be further secured with a peg inserted through both pieces.
Dovetail Joint

The dovetail joint is typically used in drawer construction. Wedge-shaped projections on one piece interlock with corresponding slots on another.
Hardwood furniture construction details Dovetail joints are shown attaching drawer fronts to the sides of the drawers (middle photos). Quality hardwood furniture also employs sturdy hinges and finished backs on case goods.

Use of Veneers


Veneers have taken a bad rap over the past several decades because much of the cheap, imported furniture sold in big box stores is made with low quality plywood or fiber board, then covered with a thin wooden veneer. Although solid wood construction is often preferred by those seeking high quality hardwood furniture, there are certain furniture designs that require veneers, for example sleigh beds that have curved wooden panels.

Why Hardwood versus Softwood Furniture?


In the world of trees and lumber, hardwood is relatively rare. About 80% of all timber comes from softwoods like pine, hemlock, cedar, and spruce. Only 20% of our timber is from hardwood trees like cherry, maple, oak, walnut, mahogany, teak and beech. As such, hardwood is relatively rare and expensive so why choose it over softwood? Generally speaking hardwood is more dense than softwood and has a tighter grain making it more resistant to decay. The density also makes hardwood more difficult for craftspeople to work with, but the beauty of the grain and the patina that develops over time makes solid hardwood furniture a prized possession.
If you're in the market for high quality furniture, what's your favorite wood? Let us know on Facebook or in the comments section below.

Already following our Blog?

Stay up-to-date on our latest creations, exclusive offers & more!

THE AUTHOR

Peggy Farabaugh

She is a CEO who brakes for salamanders, has bottle-fed rescued squirrels and spent her vacation building furniture for a rural school in Costa Rica. She believes in the future and in the people who will build it. A former distance-learning professor at Tulane University with a master’s in environmental health & safety, she turned an interest in forest conservation and endangered species into a growing, local business. She delivers rainforest statistics at breakneck speed, but knows how to slow down and appreciate the beauty of a newly finished piece of heirloom furniture.

  • +

    Years in Business

  • +

    Trees Planted

  • +

    Happy Customers