Astrid Cherry 1-Drawer Enclosed Shelf Nightstand - Priority ShipBy Copeland Furniture
Copeland's dramatic, contemporary Astrid Cherry 1 Drawer Nightstand is handcrafted in Vermont of natural solid cherry hardwood.
Modern American design features deeply splayed legs producing dramatic, futuristic cantilevers. The Astrid Bedroom Furniture Collection, named after a beautiful Scandinavian goddess, is an engineering feat that defies expectations and inspires a sense of possibility. Handmade in Vermont using eco-friendly, sustainably harvested solid cherry wood, Astrid's clean, simple design creates an oasis of quiet harmony for the high end urban bedroom.
Construction details include 45 degree miter construction where solid wood tops and sides are joined to create a perfectly seamless perimeter. The technique to produce this style of case requires extreme precision and is only attainable through exacting detail. The leading edge of this high end nightstand is beveled to present a thin delicate, line that belies it's considerable heft. Custom solid cherry wood throughout, fully finished drawer boxes with solid cherry wood drawer fronts/sides/backs, asymmetrical English dovetails and full-extension, under-mounted, soft close drawer slides (with no visible hardware) for sturdy, smooth operation. By the way, have you checked out the Top 10 Reasons to Buy Copeland Furniture Here at Vermont Woods Studios?
Base Price represents natural solid cherry wood
Shown In natural solid cherry wood
Matching Furniture is available online in our Copeland Modern Astrid Collection
Natural variations in solid wood and hand applied finishes make each piece unique. Slight grain and finish irregularities tell you that the furniture has been crafted from solid wood and are considered hallmarks of quality.
Small Item Shipping: This item may be shipped via FedEx or similar carrier
Overall: 18.5"W x 18"D x 20.5"H
Copeland's drawer fronts are solid wood, 3/4" thick
Drawer sides are also solid wood - cherry, maple or ash - and are a full 5/8" thick
Drawer bottoms are 1/4" high-grade plywood panels (5 Layer baltic birch)
Drawer backs are made of selected veneer panels and are sanded and finished to match the etire piece
You'll notice that our drawers are joined with an asymmetrical English dovetail joint. Asymmetrical refers to the fact that the pins (seen on the drawer front) and tails (seen on the drawer side) are of different widths. This is the gold standard in traditional joinery and is both aesthetically & structurally superior to other common techniques.
The drawer front integrates directly with the drawer side. Often you will find furniture where the drawer front is simply screwed on to a pre-existing drawer box. This is usually because the manufacturer has opted to purchase pre-manufactured drawer boxes rather than going to the trouble of designing, engineering and building the components to match their individual designs. Sadly, many manufacturers who market themselves as Made in the USA engage in this practice, effectively outsourcing components that make up nearly half of the product.
Some manufacturers cut corners, leaving drawer boxes unfinished. Not only is this unsightly, it is potentially hazardous to your clothing. Delicate garments can be snagged or even torn on rough unsanded surfaces and this becomes more pronounced with age as the unprotected wood is exposed to changing humidity. Copeland's drawer boxes are fully finished and sanded on the interiors.
Solid Wood Case Sides
Forty-five Degree Miter construction refers to the angle in which solid wood tops and solid wood sides are joined to create a perfectly seamless perimeter. Stylistically, these cases are highly refined and visually Modern. The technique to produce this style of case requires extreme precision and is only attainable through exacting detail. The leading edge of the cases is beveled to present a thin delicate, line that belies their considerable heft.
The Wave collection uses an Under Mounted Soft Close Glide on all case pieces. These full extension glides provide a gentle bump as the drawer is fully extended and a soft automatic retraction as the drawer closes. Since they are under mounted there is no visible hardware.
Forty-five Degree Miter
Under-mounted Drawer Glide
At Vermont Woods Studios, each piece of fine furniture is carefully handcrafted and made to order right here in Vermont. The current lead time for this product is 6-7 weeks. Once prepared for shipping, the transit time to you depends on accessibility to your area. Please select your delivery location in the drop down below to get an indication of what the transit time for your order would likely be:
All shipping times quoted are approximate only and are not guaranteed.
If you live in a location that is outside of our regularly serviced area, please add one to two weeks to your transit time.
We provide wood samples for $6 each. You may keep them or return them for store credit.