Copeland Surround Furniture

Construction Details: Surround Collection

Wood

The Copeland Surround Collection is constructed of solid Ash hardwood, and is available in 4 wood stains: Soaped Ash, Weathered Ash, Seared Ash and Taupe Ash.

Click here for more information about the woods we use.

  • Soaped Ash

    Soaped Ash

  • Weathered Ash

    Weathered Ash

  • Taupe Ash

    Taupe Ash

  • Seared Ash

    Seared Ash

The Copeland Furniture Finish

Copeland's finishes are Kitchen Cabinet Manufacturers Association (KCMA) rated - meaning they are made to withstand the type of heat, grease and spills typically found in a kitchen setting. This durability is a significant advantage over the industry's standard conventional lacquers. Also noteworthy is the matte, satin look and feel of our finish which contrasts favorably with the heavy build-up and high gloss of conventional finishes.

GREENGUARD Certified

All pieces are finished with a catalyzed lacquer/varnish finish that resists stains, moisture rings and spots, heat damage (from hot beverages, etc.), and abrasions. Finishes are formulated to meet Kitchen Cabinet Manufacturers Association (KCMA) standards and provides lasting protection. Standard finish is GREENGUARD Certified: We use a catalyzed sealer and top coat that is GREENGUARD Certified for low chemical emissions as the default finish option on all of our products. GREENGUARD certification is a testing program of UL (Underwriters Laboratory) focusing on the issue of indoor air quality. Further information about GREENGUARD certification, can be found at: http://www.greenguard.org

Bed Headboards

Surround Headboard

The Surround headboard is crafted out of solid ash hardwood and is upholstered in your choice of fabric.


Bed Rails

Bed Rails

Bed side rails are solid hardwood.

All Copeland Furniture bed rails are fastened with a simple to use but extremely durable system designed keep the joint firm and rigid for the life of the product. Here's how it works:

  1. A headless, threaded machine bolt is screwed into the headboard. Wooden dowel pegs align the bed rail with the headboard or footboard. This forces the bed rail into proper orientation and prevents any future twisting.
  2. The parts are then joined together with a special contoured washer and hex nut using the supplied open-end wrench.

Bed Slats and Platforms

Surround beds are available in either platform or mattress & box-spring configurations, and utilize three center support legs for additional mattress support. These center legs may not be visible in product images.

Mattress support comes in one of the following forms depending on the configuration selected:

A T-slat

A T-Slat is a 3" plywood slat reinforced by a solid hardwood spine. Viewed from the side, the parts form the shape of a T, hence the name. T-Slats always come in sets of three and are standard on beds intended for box spring and mattress.

Platform Kit

Platform Kits are similar to T-Slats in that they consist of a plywood horizontal element reinforced by a solid wood spine. However they differ in that they are much wider and are intended to provide the direct support for the mattress. They come in sets of six platforms and are standard on beds intended for mattress alone.

Drawer Boxes

drawer box

Surround drawer fronts are solid wood, 3/4" thick. Drawer sides and backs are also solid wood and are a full 5/8" thick. Drawer bottoms are 1/4" high-grade plywood panels (5 Layer baltic birch).

You'll notice that our drawers are joined with an asymmetrical English dovetail joint. Asymmetrical refers to the fact that the pins (seen on the drawer front) and tails (seen on the drawer side) are of different widths. This is the gold standard in traditional joinery and is both aesthetically and structurally superior to other common techniques.

The drawer front integrates directly with the drawer side. Often you will find furniture where the drawer front is simply screwed on to a pre-existing drawer box. This is usually because the manufacturer has opted to purchase pre-manufactured drawer boxes rather than going to the trouble of designing, engineering and building the components to match their individual designs. Sadly, many manufacturers who market themselves as Made in the USA engage in this practice, effectively outsourcing components that make up nearly half of the product.

Some manufacturers cut corners, leaving drawer boxes unfinished. Not only is this unsightly, it is potentially hazardous to your clothing. Delicate garments can be snagged or even torn on rough unsanded surfaces and this becomes more pronounced with age as the unprotected wood is exposed to changing humidity. Copeland's drawer boxes are fully finished and sanded on the interiors.


Solid Wood Case Sides

Surround Case Side

Solid Side construction means that the main vertical structural members are the 3/4” solid wood side panels. This simple but versatile form of construction can accept any number of decorative elements allowing a wide array of design expressions.


Case Tops

Glass Top
Wood Top

Each Surround case piece is constructed with either an Opel Laminated Glass top or a solid wood top.


Drawer Glides

Under-mounted drawer glide

The Surround collection uses an Under Mounted Soft Close Glide on all case pieces. These full extension glides provide a gentle bump as the drawer is fully extended and a soft automatic retraction as the drawer closes. Since they are under mounted there is no visible hardware.